Step-by-step Guide to Installing a New Shower Unit

Step-by-step Guide to Installing a New Shower Unit

Blog Article

Schedule Now

Everyone maintains their private way of thinking in relation to How to Install a Direct-to-Stud Shower Enclosure.

A successful shower installment calls for cautious preparation as well as a great deal of work. For the most part, you will need to do three sorts of tasks: mounting walls, mounting the plumbing, and ending up wall surfaces.

Prep work

Firstly, you need to choose the sort of shower that you want to set up. It is essential to ascertain whether the chosen shower is capable of managing specific systems as well as can regulate a secure degree of water via the central heating boiler. The majority of shower units nowadays are made to be adaptable to different water pressures (such as stored hot water and chilly mains).
It is likewise important to think about the water pressure and also the preparation of the piping and also water drainage for the shower

Various Kinds Of Shower Units

Push-on Mixer: The hose pipe as well as spray parts of the push-on mixer shower system can be connected to the bathroom faucet as per your need, as well as the water temperature can be adjusted through the taps. Push-on mixers are cheap as well as incredibly straightforward to mount. Nevertheless, although the hose link is straightforward, it is conveniently removed. Additionally, it is inconvenient to adjust the temperature level.

Bath/Shower Mixer: The tube and spray of this kind of shower are incorporated with a bath mixer tap, and the temperature can be adjusted via the bath taps. It is a very low-cost alternative as well as no added plumbing is involved. Nevertheless, the bath/shower mixers likewise deal with inconvenient temperature control alternatives.

Manual Mixer: The pipe and also spray of a manual mixer shower system are a part of the wall surface unit and the hot and cold water materials are attached to a single shutoff The temperature and stress of the water are regulated with either one or a variety of knobs (in a lot more costly showers). Although temperature control is a lot easier in hand-operated mixer kinds, they are a lot more pricey than the previously stated mixers. They likewise call for added plumbing of cold and hot supply of water pipelines.

Thermostatic Mixer: The hose and also spray of this shower kind belong of the wall surface unit and also the cold and hot water materials are connected to a solitary shutoff right here as well. It is total with an integrated stabiliser to self-adjust the water temperature level as well as to prevent it from ending up being too hot. One of the greatest advantages of a thermostatic mixer shower kind consists of practical temperature control. However, it is one of the most expensive of the various mixer alternatives.

Power Shower: A power shower is a solitary system consisting of a powerful electrical pump that can altering both the water pressure as well as temperature level. This sort of shower can be fitted if there is water supply from a cold water cistern and a hot water cyndrical tube. A power shower makes the change of both stress and temperature level easy. On the other hand, it is unsuitable for water heated up straight by the shower or where the water is provided by a mix boiler under keys stress.

Electric Shower: An electrical shower is plumbed right into a keys cold water supply as well as it heats up the water electrically. It is necessary to note that for this shower type to be mounted, the mains stress requires to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The unit permits the temperature as well as pressure to be adjusted via a handle. Models with temperature level stabilisers are better as they continue to be unaffected by other taps elsewhere being used within the family. A significant drawback of electric showers is that the control handle only allows for the option of heats at less pressure, or reduced temperatures at a better pressure. This is problematic in the winter season when the spray is commonly weak and the keys water is chillier. However, this problem is dealt with in some designs which are offered with a winter/summer setup.

Method

Depending upon the sort of shower you want to install, the shower head need to either be fitted in order to avoid its contact with the water in the bath below or the base tray, or it needs to have a check valve.
Before beginning, it is suggested to mark the positions of the shower head and control, and also to prepare the pipe-work entailed. In addition, the drain system to eliminate the drainage will require to be planned. Both settings of the wire route and also the shower button will also need to be thought about if an immediate or electric shower unit is being installed.
Utilize the direction guide given with the shower system to fit the shower control.Before suitable the pipelines that will supply the water to the shower system, it is very important to cut off the supply of water. In order to secure the pipelines, they must be provided a water-proof covering as well as additionally fitted with separating valves. The pipes can after that be buried right into the wall and glued over to neaten the general look.
Fit the base tray, shower head, and also installations.
Connect the major shower control to the pipelines that will be providing the water (This may need a women screw string adapter).
Reconnect the water supply and also examination the pipes for any leakages, as some might require tightening up.
If you are mounting an electric shower, keep in mind to switch off the electricity supply before making any kind of electrical links. When these links have actually been made (there ought to be advice within the user's manual), the power supply can be switched over back on.

Readjusting Water Pressure to Match Your Shower

The cold water storage tank can be lifted to a greater height (sometimes just 150mm (6inches)) by fitting a strong wood support underneath it - potentially composed of struts as well as blockboards. If you pick this option, the major as well as distribution pipelines will additionally have to be increased to meet the new height of the reservoir.
Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is picked, it has to be linked into the power supply in order to operate.

Piping as well as Drain

It is best to utilize 15mm size supply pipes, and make the runs to the shower as brief and also straight as possible so regarding keep maximum stress and also minimise heat loss. Additionally, by minimising making use of arm joints for pipe edges, you can lower the resistance in the flow of the water system. You can achieve this by bending the pipelines rather.

The Majority Of Typical Blunders

Breaching or ignoring neighborhood code restrictions.

Utilizing pipelines that are as well little.

Affixing copper to galvanized without making use of a brass or dielectric fitting in between both.

Not using tape or pipe compound at threaded joints.

Uneven your components when mounting them.

Not installing an air space filling up for components.

Reducing supply stub outs as well short to install the shutoff valves onto after the completed wall is in area.

Not correctly aligning tubing right into installations or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubes is at an angle will trigger a leak.).

When turning the water back on in your house, always run the outdoors pipe shutoff or flush your bathrooms to hemorrhage dirt and also air from the lines. This particles can create problems in your sink faucets and also various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Hopefully you enjoyed our section on How to Install a One-Piece Shower Unit. Thanks so much for taking the time to browse our article. Sharing is nice. Helping others is fun. We thank you for reading our article about How to Install a Shower Enclosure .

Contact Us Today

Report this page